Thursday, March 23, 2017

Phased Out

Salutations.

So I've been working on a large scale project that would already be elaborate enough, but has been made even more of a clusterfuck thanks to it being broken down into phases.  I actually don't know what software the Architect/Engineer are using to develop their plans - although based on how shitty they look, Revit is a pretty good bet.

I started the project (which I've probably talked about before), and did the first phase (which was rather huge) to completion, when I received what was ostensibly the second phase drawings from the electrical engineer (they sent the wrong system drawings the first time).  I was confused to see that what they were referring to as 'phase 2' was actually half of the building that I had originally designed as Phase 1.

I made the mistake of assuming that they knew what they were doing - but it seemed logical, because they had separate systems, and were basically two buildings that made up a ring.  I went ahead and broke them out into Phase 1 and Phase 2 to match, but then a few weeks later I received a panicked phone call from our guy (in one of our out-of-state offices) who had been told by the electrical contractor that the Phase 2 I had issued was part of Phase 1.

Fortunately I had already completed what I thought was Phase 3 (part of the problem is that nobody I talk to has any fucking clue what is supposed to be in each phase - despite there being very clear terminology that could be being used to describe each one, instead of just numbering them), and so I told him to give those drawings to the electrical contractor while I figured out what the hell was going on (because they sure as fuck weren't going to).

My contact with the electrical engineer was no help, so I bypassed him and contacted the architect, who cleared up the confusion (or at least clarified where the confusion had originated).  For some reason the electrical engineer had broken down Phase 1 into two 'packages' (meaning I had done it correctly the first time, and only became confused when they resent their second package for no discernible reason).

I went ahead and put Phase 1 back the way it was, changed Phase 3 to Phase 2, and then got started on the actual Phase 3 - which is now on hold because I'm trying to dig through a pile of comments on a separate project (while others pile up).  I had already made some adjustments, and received a accusatory e-mail (from the same guy who was panicking about the phased project - although it turns out that they had someone leave their office, meaning this guy just had everything fall in his lap) asking why I hadn't addressed the rest of the comments.

It turned out the reason I hadn't addressed the rest of the comments is because, while they received them a week ago, they HADN'T BOTHERED TO FUCKING SEND THEM TO ME.  Most were fairly simple, but the last 2-3 have required me to get drawings from the mechanical engineer (since the electrical engineer for this project hasn't updated their drawings yet), and it was still a motherfucker to discern what the hell they were talking about.

It didn't help that the comments themselves were spread across a set of fire protection drawings (that I received first), an e-mail, another marked up set of drawings attached to that e-mail, AND a list of comments attached to the e-mail (that the comments in the e-mail referred to extensively).  I just slapped it out before moving on to the next set of comments from an AHJ - two of which are just notes to add, but three of which refer to equipment not shown on the engineer's drawing.

The AHJ actually called me the other day to ask about two of the items (one of which is actually on the Mechanical comments but affects me anyway (which is why, unlike most people, I always read every comment and not just the ones directed at me).  I forwarded on questions to someone who (hopefully - but doubtfully) has answers, and then (mostly to spite the motherfuckers working on the large multi-phased project) I decided to dive into a fairly simple project I received information for the other day and CAD files today.

It won't take long to finish, so I'll probably be back to Phase III by the end of the day.  And when I get it done - there's a Phase IV, which is a free-standing building (so basically it's own little project) that I wouldn't have even known to look for if I had continued down the path that the electrical engineer had me on (because I would've assumed I was finished after doing the part I'm currently on).

We're going to be facing a lot of whacked out confusion over the next few weeks/months due to that guy leaving with several projects at varying levels of design, review, installation, commissioning, etc. - the only saving grace is that Revit is nowhere to be seen.  I'm sure a Reviteer would be the first to point out that it has all kinds of tools for managing project phases, filtering etc. - which is great, except that then you would have to use Revit.

And I'd still be on Phase 1.

Fuck stupid people who refuse to communicate - and fuck Revit.

-Skullfuck

Next Time: Model Student

2 comments:

  1. I was forced into Revit HELL after 28 years of AutoCAD electrical design and found your site blog ect ect at 2.25am on Saturday March 25...the day after the day the WH went black...anyway I wanted to let you know of a product I worked with for a company that developed a much better working package for design than autocads REVIT from HELL! You can get a month demo to see how it works, but I used it back in the early O0's as I worked for the company that was developing it...DesignMaster from a company now located in Lynnwood WA. If you get a chance to try it out let me know, they have a great product and it does all the schedules and risers the way they are supposed too...why, because Engineers who work in the industry made the program..HVAC and Electrical..yeah Arch...they have their day too, but that is another story...great stuff SkullMan! Johnne in Seattle

    ReplyDelete
  2. I'll have to check it out when I have a chance - although I'm no longer doing electrical design (and have no plans to do it in the future).

    Any industry that allows itself to be brought under the heel of a company like the one that Autodesk became when it decided to purchase Charles River Software and reverse-engineer it into the godless bastard clusterfuck that they released as 'Revit' is one I want nothing to do with.

    Nobody fucking tells me how to do my goddamned job.

    Nobody.

    ReplyDelete